BöttcherFount S-3011 Fountain Solution Additive, 20 l plastic can

BöttcherFount S-3011 is a fountain solution additive for sheet-fed offset and continuous form printing. For medium and hard water.

• standard dosage 2 -3 % for IPA-reduction to 6 – 8 % very stable ink-/water balance
• reduced and stable water pick-up of the ink, therefore higher ink densities obtained
• fast start-up after machine standstill
• for conventional and continuous dampening units very suitable for CTP plates
• increased plate protection
• for water hardness 4 – 30° dH (total hardness)
• pH-value 4.2 – 4.5 (according to water hardness) reduced calcium deposits on ink rollers
• minimises build up of paper dust and ink on the blanket suitable for metal pigment, UV and fluorescence inks effective prevention of foam
• increased conductivity per % input: 600 μS/cm
• density 1.13 (kg/l)

Before applying BöttcherFount S-3011, the fountain system must be completely emptied and cleaned thoroughly, preferably with BöttcherPro Hydroclean.
Use BöttcherPro Calcit as a re-hardener for RO and soft water.