semi-automatic angle welder Smipack FP 560 A with single chamber shrink tunnel T 450
from 2012

semi-automatic angle welder with permanent cooling system, suitable for a wide range of products.
Thanks to the integrated cooling system, the FP 560 A achieves consistently good welds and is therefore ideal for larger throughput volumes.
An automatic rewinding device for the film remnant and an electric quantity counter are integrated.

10 different programs can be stored via the control panel.
The welding frame is closed automatically by means of time relay control, or manually by foot switch (optional) and push button.

The motorized belt at the outlet conveys the shrink-wrapped product to the downstream shrink tunnel

-Average hourly output: up to 1500 pieces
-Remaining film winder included
— Welding frame size: 560 x 430mm (WxD)
— max. Product height: 230mm
— max. Film width: 600mm
— up to 10 different programs can be stored
— in RAL 7035 (gray)
— 230 V / 50 Hz / 1 phase
— max. Power: 2.5 kW
— Dimensions: 2,010 x 790 x 1,050 mm (LxWxH)

Smipack T 450 single chamber shrink tunnel

ideally suited for large throughput quantities.
The Tunnel T 450 can also store up to 10 programs that can be called up at any time.
The tunnel conveyor consists of silicone-coated rotating rollers.
The tunnel is equipped with an automatic shut-off and both conveying speed and shrink temperature can be regulated.

-Transport speed adjustable (2.8 — 18.8 m/min)
— max. Product height: 230mm
— Conveyor belt with silicone-coated rods (rotating / non-rotating adjustable)
— Adjustable air baffles
— up to 10 different programs can be stored
— Shrink temperature adjustable
— Supply voltage: 380-415 V 3 PH-N-PE, 50/60 HZ
— max. Power: 8.0 kW
— Dimensions: 1,370 x 835 x 1,440 mm (LxWxH)