MKW Rapid UT 12 brochure production
Available
| Manufacturer | MKW |
|---|---|
| Year | 2008 |
| Model | Rapid UT -12 B3 GS |
- Описание
- Доставка
- О продавце
- Расположение
- Другие товары
Описание
Gathering machine / brochure production MKW Rapid UT 12/B3/GS + SFT 350
Year of manufacture: 2008, Format: min. 10 x 14 cm , max. 35 x 50 cm
Equipment: 12 stations gathering machine
TFT Touch operation
Circulation toothed belt table with tandem function 1:1 and 2:1 timing
Shot possibility at any station
Carton change function at any station
Adjustable tipping suction cup
side and front blowing air
max. Stacking height 700 mm
Paper weight from 14 — 1000 g/sqm
self-measuring electronic double and missing sheet control
SFT 350 stitch-fold-cutting unit
Quick format adjustment
Front trim with 6cm minimum trim over upper and lower knives
Blow-off air on the knife
Adjustable pressing device
2 stitching heads Hohner 48/S
PC-controlled collating with the MKW RAPID® UT series
The rotary table principle enables tandem production and guarantees
a safe and quiet paper transport.
Tandem function
The tandem system is activated by a simple changeover at the operating terminal.
The parallel use of two stations each with the same pressure allows up to 75 %
higher production output.
Single function
Standard collating in 1:1 operation
for high page counts.
MKW RAPID UT — Control system
The use of state-of-the-art industrial PC technology results in precise
Control of the systems, controls the collation digital
and enables you to connect to your operational production
control.
The operating system with high-quality TFT display allows a
uncomplicated operation of the machines. All settings are made
by means of logically structured menus, which are simply called up on the display.
be Operator guidance and color-coded status displays
ensure an optimal production flow.
Save and recall job configurations in seconds
Combinable production counters for exact runs and separation
Standard special functions programmable at any station
Serial quality control through missing and double sheet monitoring per station
Automatic rejection of faulty sets for non-stop operation
Dynamic station selection for shortest makeready times during job changes
Местоположение продукта
-
ОБОРУДОВАНИЕ Б/УPROOffer 243470 Kodak Prinergy Workflow Version 5.1.2 -
ОБОРУДОВАНИЕ Б/УPROOffer 243002 MBO T 530-6-R with AS-540 buckle plate folder -
ОБОРУДОВАНИЕ Б/УPROOffer 245300 Bookletmaker Ernst Nagel Foldnak 100 with Trimmer 100Польша -
ОБОРУДОВАНИЕ Б/УPROOffer 238270 Flat pile feeder MBO F 76 with independent drive -
ОБОРУДОВАНИЕ Б/УPROOffer 239384 POLAR 55 EM cutting machine -
Производство книгPROOffer 242255 Hohner Accord 13 wire stapling machine







