91,95 €
BöttcherPro Silicone Spray Silicone in a Spray Can (12×0.4 l)
Possible applications of BöttcherPro Silicone Spray are many and diverse. Typical applications in print:
- In sheet-fed offset
Optimization of paper run in feeders
Reduction of ink accumulation on impression cylinders Lubrication of squeaking machine parts
- In web offset
Optimization of paper run in press folders
Reduction of ink accumulation on turner bars, chill rolls, folder formers, etc.
- In newspaper printing
Prevention of attachment of the paper web to the blanket when re-starting the machine Reduction of ink accumulation on turnbars, web guide rollers, etc.
- In print finishing
Optimization of paper run
Reduction of smearing of printed matters Lubrication of squeaking machine parts
- generates a thin protective, ‘lubricating’ film
- improves the sliding ability on metal surfaces a fine spray film enables economic dosing
BöttcherPro Silicone Spray is applied by a spray can in a thin film onto the surfaces. If necessary, wipe with a lint-free cloth after application to smooth the film layer and polish if required.
The can is under pressure and must be protected from direct sun and from temperatures above 50 °C during storage.
Available on back-order
- Description
- Additional information
- More Products
- Warranty Policy
- Product Enquiry
Description
BöttcherPro Silicone Spray
Additional information
| Weight | 6 kg |
|---|---|
| Dimensions | 25 × 25 × 25 cm |
| Volume | 6×1 litre, 20 litres |
-
S3010+ BöttcherFount Fountain Solution Additive
-
EG-UV Rejuvenator for Rollers and Blankets in UV Printing
Refund Policy
This Refund Policy applies to all services and products offered through our marketplace, including consulting, on-site service work, equipment upgrades, and spare parts.
1. Services Provided by Independent Vendors
All services on this marketplace are performed by independent vendors.
Each vendor is solely responsible for the quality, delivery, and completion of the service they provide.
Refund requests for:
-
consulting services,
-
repairs or on-site work,
-
equipment upgrades,
must be submitted directly to the vendor within 7 days from the date the service was delivered.
Vendors may approve or decline a refund based on:
-
the scope of work performed,
-
the evidence provided,
-
the terms agreed upon before the service.
2. Spare Parts and Physical Goods
Refunds for spare parts or physical goods may be issued only when:
-
the item was damaged on arrival,
-
the item is defective,
-
the wrong item was delivered.
Items must be returned in unused condition within 14 days of delivery, unless the vendor specifies otherwise.
3. Non-Refundable Items
The following cannot be refunded:
-
completed consulting sessions,
-
on-site service calls already performed,
-
diagnostic visits,
-
custom-made parts,
-
items installed or used by the customer.
4. Marketplace Fees
Marketplace service fees and transaction fees are non-refundable, except when a refund is due to a vendor’s failure to deliver the agreed service.
5. Disputes
If the customer and vendor cannot reach an agreement, the marketplace may assist in reviewing the case.
However, the marketplace is not the service provider and cannot guarantee a refund on behalf of the vendor.
6. How to Request a Refund
Refund requests must include:
-
order number,
-
date of service or delivery,
-
detailed explanation,
-
photos or documentation (if relevant).
Requests can be initiated through the customer’s account dashboard.
