Upgrading KBA Densitronic S heads to LED
Polska
en, pl4450,00 €
English
PolishAvailable
Until around 2008, KBA Rapida printing presses were equipped with the Densitronic S measuring device. KBA no longer works with these devices, so repairing the heads is often difficult for printing houses. Most of the Densitronic S devices are still in operation, but over time they wear out and need to be repaired.
Over time, the stability of the head is compromised, leading to errors on the monitor.
We offer a complete technical service and upgrade the calibrated light source in the form of a bulb, which needed periodic replacement, to a modern LED light source.
The cost of the service includes a complete set of maintenance and repair of the head.
The standard package includes not only the installation of the Retrofit Kit, but also the inspection of the main parts for wear and tear and their replacement. A specialist checks and adjusts the optics, 34-pin ribbon cable, diode covers, and vacuum valve.
After the work is completed, you will no longer need to replace the calibrated lamp, and the device comes with a 6-month warranty.
Available
- Opis
- Żegluga
- Informacje dodatkowe
- Informacje o dostawcach
- Lokalizacja
- Więcej produktów
Opis
How to proceed
You need to remove the scanning head from the beam, pack it and send it to our address, which you will receive after payment. You send the device to our address at your own expense by any tracked postal service. We recommend insuring the goods during shipment.
Repairs take approximately 2 weeks.
After the repair, we will send you the head and issue an invoice. The fact of shipment for VAT credit is based on the shipping documents.
Informacje dodatkowe
| Waga | 3 kg |
|---|---|
| Wymiary | 25 × 35 × 35 cm |
Informacje o dostawcach
- Nazwa sklepu: Steely D. Consumables
- Dostawca: Steely D. Consumables
- Jeszcze nie znaleziono żadnych ocen!
Lokalizacja produktu
Сувалки, Польша-
CZĘŚCI & OSPRZĘTHeidelberg SM74 (625950-…), for a single print unit -
CZĘŚCI & OSPRZĘTPro-Tect Sealer BöttcherPro -
CZĘŚCI & OSPRZĘTOptima Blue BöttcherTex Mini Rolls for KBA
-
CZĘŚCI & OSPRZĘTKBA Rapida 106 (376101-377000), for a single print unit -
CZĘŚCI & OSPRZĘTHeidelberg QM46-4DI, for a single print unit -
CZĘŚCI & OSPRZĘTHeidelberg CD74 UV (450390-…), for a single print unit
Recenzje
Jeszcze nie ma recenzji.
Wyświetlaj wyłącznie recenzje w języku Polski ()