KONSULTACJE | SERWIS | FREELANCERZY | SPRZĘT | MODERNIZACJE✳️ B2B Marketplace for Printers

BöttcherFount S-3010 Fountain Solution Additive

BöttcherFount S-3010+ is a fountain solution additive for sheet-fed offset and continuous form printing.

• use at a concentration of 2 – 3 % for IPA-reduction to 6 – 8 %
• very stable ink-/water-balance
• reduced water pick-up of the ink, therefore higher ink densities obtained
• fast start-up and stable printing for long runs
• for water hardness 5 – 20° dH (total hardness)
• pH-value 4.8 – 5.0 (depending on water hardness)
• reduced calcium deposits on ink rollers
• suitable for UV and Hybrid inks as well as special inks containing metallic pigments corrosion inhibited

minimises build-up of paper dust and ink on the blanket suitable for CTP plates
effective plate protection during press stops
suitable for copper rollers

increased conductivity per % input: 390 μS/cm density 1.10 (kg/l)

Before applying BöttcherFount S-3010+, the fountain system must be completely emptied and cleaned thoroughly, preferably using BöttcherPro Hydroclean.

Use BöttcherPro Calcit as a re-hardener for RO and soft water.